Specifications At The Nameplate Label; Fig. 1-38: Analyzer Nameplate Label (Example) - Emerson ROSEMOUNT Analytical NGA 2000 Instruction Manual

NGA 2000 MLT Hardware
TECHNICAL DESCRIPTION

SPECIFICATIONS AT THE NAMEPLATE LABEL

1.12 Specifications at the Nameplate Label
The analyzer nameplate label gives important information about the instrument's configuration,
installed measuring principle(s), sample gas(es) and measuring range(s).
In case an instrument is built according a suitability approval the related certificate number is given,
too.
The nameplate label is located either on the instruments left or right housing side or at the inner side
of the front door (MLT 2).
The CAT nameplate label is located at the housings left side whereat the label as it is shown below
is affixed to the inner analyzer module.
Model and installed measuring
principles
(here: MLT 4 Rackmounting,
2 x IR, 2 x UV, 1 x PO2)
Channel 1:
Gas and measuring range
(here: CO, 60/600 ppm)
Channel 4:
Gas and measuring range
(here: CO, 150/1,500 ppm)
Channel 5:
Gas and measuring range
(here: O , 5/21 Vol-%)
2
1 - 44

Fig. 1-38: Analyzer Nameplate Label (example)

Instruction Manual
90002929
Serial number
Channel 2:
Gas and measuring range
(here: SO , 26/260 ppm)
2
Channel 4:
Gas and measuring range
(here: NO , 25/250 ppm)
2
International approval marks
Emerson Process Management GmbH & Co. OHG
07/2006