NGA 2000 MLT Hardware
TECHNICAL DESCRIPTION
MLT 1 (1/2 19" HOUSING)
1.4
MLT 1
The different analyzers and analyzer modules are assembled in principle identically.
All components of analyzers or analyzer modules are incorporated into a housing for platform
mounting (MLT 1) or a 1/2 19" housing (MLT 1).
The equipment is specified for an operating voltage of 24 V DC (± 5 %).
There are mounted optional different components at the rear side of the front panel (Fig. 1-7).
1.4.1
MLT 1 1/2 19" housing
The 1/2 19" and 1/1 19" housings are available as rack mounting (R) or as table-top (T) versions.
For analyzer modules there is mounted a blind plate instead of an operation front panel.
On the rear panel the connector for 24 V dc supply (MLT 1 [not MLT (M)]), the gas connections,
the network connections and the connectors of optional PCBs (see optional, separate Operation
Manuals) are accommodated.
1 - 6
Fastening screws for rack mounting or carrying-strap bracket
Fastening screws for rack mounting or carrying-strap bracket
Fig. 1-6: MLT analyzer, Front view
Instruction Manual
90002929
Emerson Process Management GmbH & Co. OHG
07/2006