NGA 2000 MLT Hardware
OPENING OF HOUSING
MLT 1 (1/2 19" HOUSING)
15.1.2
MLT 1 (1/2 19" housing)
15.1.2.1
Housing Cover
Disconnect all voltage supplies.
Unscrew fastening screws for rack mounting / front frame if necessary (Fig. 1-1).
Remove analyzer out of rack or remove the front mounting frame and carrying strap to rear.
Unscrew the respective fastening screws at both housing sides (Fig. 15-3)
Remove the respective housing top cover panel.
Repeat above steps in reverse order to assemble the housing
15 - 4
fastening screws housing cover
Fig. 15-3: MLT 1 (1/2 19" housing)
(Fastening screws housing cover)
Instruction Manual
90002929
Emerson Process Management GmbH & Co. OHG
07/2006