Emerson ROSEMOUNT Analytical NGA 2000 Instruction Manual page 171

Instruction Manual
90002929
07/2006
Connect the two white grounding cables to the UV source.
One grounding cable comes from power supply for UV source .
nd
The 2 grounding cables comes from PCB ESP10 (part no. 43002530).
Connect both cables to the UV lamp (connection point) as indicated below.
PCB ESP10
Fig. 12-4b: UV Source and PCB ESP10 (top view, housing cover disassembled)
Emerson Process Management GmbH & Co. OHG
CONNECT/DISCONNECT UV SOURCE AND POWER SUPPLY FOR UV SOURCE
Cable from UV source to UV power supply
UV Source
NGA 2000 MLT Hardware
REMOVAL / REPLACEMENT OF COMPONENTS
Connection point at UV source
12 - 9