Emerson ROSEMOUNT Analytical NGA 2000 Instruction Manual page 22

NGA 2000 MLT Hardware
SAFETY INSTRUCTIONS
ADDITIONAL HINTS FOR MLT 2 AND CAT 200
ADDITIONAL HINTS FOR MODELS MLT 2 AND CAT 200
Installation and connecting mains and signal cables are subject to qualified
personnel only taking into account all applicable standards and legislative
requirements!
Failure to follow may cause warranty invalidation, property damage and/or
personal injury or death! Mains and signal cables need to be connected to
internal srew terminals requiring to work at open housing near life parts!
Installation of this instrument is subject to qualified personnel only, familiar
with the resulting potential risks!
These gas analyzer do not provide a mains power switch and are operable
when connected to power.
These gas analyzers do not provide a mains switch! A mains switch or
circuit breaker has to be provided in the building installation. This switch
has to be installed near by analyzer, must be easily operator accessible and
has to be assigned as disconnector for the analyzer.
Cables for external data processing must be double insulated for mains
voltage when used inside the instrument!
If double insulation is not available signal cables inside the analyzer must
be installed in a way that a distance of at least 5 mm is ensured permanently
(e.g. by utilizing cable ties).
S - 8
ADDITIONAL HINTS FOR MODEL MLT 2
Instruction Manual
90002929
Emerson Process Management GmbH & Co. OHG
07/2006