Instruction Manual
90002929
07/2006
1.3.2.4
Storing the actuator tool
The tool is provided with a chain and a special fixture to be installed at one of the analyzer's mounting
screws (see Fig. 1-5).
It is recommended to place the actuator tool on the fixture as shown to avoid unintended interference
while not in use.
Emerson Process Management GmbH & Co. OHG
OPERATING FRONT PANEL: MAGNETICALLY OPERATED TOUCH PANEL
Fig. 1-5: Actuator stored when not in use
NGA 2000 MLT Hardware
TECHNICAL DESCRIPTION
1 - 5