Installing And Leveling Casters; Shelves - Fisher Scientific Isotemp Plus 13-986-120 Instruction Manual

U I
NPACKING AND NSTALLATION
Note
The refrigerator must be level in order
to provide adequate condensation
drainage as well as proper door align-
ment and operation. The refrigerator
should be in its final operating loca-
tion and set so that it is firmly posi-
tioned on the floor.
Note
Chromatography units include addi-
tional 1/2 shelves, which can be
used in place of the full shelves.
6

Installing and Leveling Casters

Isotemp Plus refrigerators and freezers come with four
casters, which thread into the base of the unit, one in
each corner. Use the wrench provided to thread the cast-
ers completely into the base of the unit. Back the casters
in or out until the unit is level and resting on all four cast-
ers. See Figure 1.
Refrigerator
Base
Thread casters directly
into base at four corners.
Figure 1

Shelves

Shipped inside each cabinet is a set of epoxy coated
shelves. Epoxy coated filler shelves are provided for units
with more than one door. Shelf supports, located in the
plastic bag, are pushed into the side pilasters, one in
each corner, at the desired shelf height. Replacement
shelves are available individually. See page 14 for shelf
part numbers.
Figure 2
Tighten using
wrench provided.