Packing List; Selecting A Location; Installing And Leveling Casters - Fisher Scientific Isotemp Plus 13-986-142A Manual

Note
The freezer must be level in order to
provide adequate condensation
drainage as well as proper door
alignment and operation. The freez-
er should be in its final operating
location and set so that it is firmly
positioned on the floor.

Packing List

The following items are packed in the envelope located
inside the freezer chamber. If any of the following items
are not present, report the missing item to your local
Fisher representative.
1. Warranty Card
2. Instruction Manual
3. Door Lock Key
4. Power Switch Key
5. Chart Recorder Instructions (Catalog No.'s with
"R")

Selecting a Location

Choose a location for the freezer that will provide at least
three inches of clearance between the cabinet and any
adjacent vertical surface at the sides and rear.
Appropriate electrical power must be available. Locate
the freezer within 6 feet of the power outlet so that no
extension cord is required.

Installing and Leveling Casters

Isotemp Plus freezers come with four casters, which
thread into the base of the unit, one in each corner. Use
the wrench provided to thread the casters completely into
the base of the unit. Back the casters in or out until the
unit is level and resting on all four casters. See Figure 1.
Freezer Base
Thread casters directly
into base at four corners.
Figure 1
U I
NPACKING AND NSTALLATION
Tighten using
wrench provided.
5