Safety Labels Overview - QubicaAMF Edge String Owner's Manual

•
Noise levels may reach up to 110dBA while using this equipment. Hearing protection
should be used when performing machine operation and maintenance tasks.
•
Declaration of Conformity (Appendix B) provided by QubicaAMF is fulfilled only if the
following safety requirements are observed when using this equipment.
•
This manual is part of the EDGE String product and must be kept near the machine(s) at
all times.
•
Training Sign-Off (400-051-208) and Installation Sign-Off (400-051-210) must be filled
out before operating this equipment.

Safety Labels Overview

Warnings at Machine Boundary
Warning
Hazard exists; use caution. Failure to follow all safety guidelines in this
manual may result in personal injury.
Electrical Hazard Warning
Indicates electrical shock hazard. Follow safety guidelines in this manual.
No Access – Approved Operator Only
Indicates machine boundary. Only approved operators may use equipment or
proceed beyond machine boundary. Follow safety guidelines in this manual.
No Step
Do not step on indicated surface.
Do Not Remove Hardware
Do not remove hardware from indicated assembly. Only approved operators
may use this equipment. Follow safety guidelines in this manual.
Read the Manual
Follow all instructions in this manual.
Use Pin Hook
Use pin hook to move pins or balls while standing outside machine
boundary.
400-051-202-01 Rev. B
Owner's Manual
Page 1-4