Driving And Operating; Working Depth - DAL-BO Dinco 2000 Manual

Ñ
Ñ
Ñ
Ñ
When unfolding no persons are allowed within the radius of action of the
Ñ
Ñ

Working depth

Driving and operating

The right operation is important to obtain the optimal utilisation of your Dinco.
This applies to fieldwork as well as security.
Each day before work is started check that no nuts or bolts are loose and
that all splits pins are intact.
When turning or reversing Dinco should be lifted.
No extra weight should be mounted on the Dinco as the implement is not
designed for it.
implement.
When driving on public road the hydraulically folding model should be
fixed in transport position.
During transport any side discs should be folded.
The shares give a heavy cultivation. Despite the heavy cultivation the field
should be left even and with no banks of any kind. This requires a correct
adjustment of the implement (see "Adjustment" page 6).
Dinco can be adjusted to very light tillage in a depth of 4 to 5 cm. This is
possible only because the shape of the tine leaves the field level and
completely cut.
Fig. 6
Dinco should be adjusted so that it is carried by the rear roller. The handle for
the tractor lift must be lowered completely when driving in the field so that the
lift is floating and can move with the terrain. The cultivation depth will thus be
controlled by the rear roller in the back and by the levelling bar in the front.
When changing the working depth a readjustment of the discs is necessary. The
discs are designed to work in the topsoil, however, they do not perform any
real tillage except levelling out the field after the tines, so that a suitable
quantity of earth is thrown back after the harrow tine.
Dinco
Page 13