Table of Contents
Advertisement
Ñ
Ñ
All bolted connections should be checked often and tightened when needed.
Ñ
Wearing Parts
Other things
Defective hydraulic hoses should be replaced immediately. Defects on hoses
may cause injury to persons or damage to the implement.
After working with oil, hands should be carefully cleaned. Oil stained clothes
should be removed immediately as it may cause damage to the skin.
The points on Dinco are reversible and should be turned before the shank to
which the points have been clamped starts to wear down (see "Replacement
and repairs" page 19). Points with covering discs on the outermost tines should
be changed from right to left when turning the points so that the covering discs
are placed on the outside.
Wings should be changed when they are worn down to the extent that the work
result is no longer satisfactory or before the shank starts to wear down.
Avoid spilling oil on the ground. Should it happen anyway, gather it together
and deliver it for destruction.
When parked under damp conditions for a longer period piston rods should be
lubricated in oil or fat to avoid corrosion.
Cleaning and checking
When the season is over, the machine should be cleaned for dirt and moist
attracting material. This facilitates later services and repairs.
Dinco
Page 17
Advertisement
Table of Contents
