Table of Contents
Advertisement
Folding and unfolding
Ñ
Speed
Power
Page 14
On the models for the German market side discs for levelling the outside of the
outermost tine are standard equipment whereas models for other markets are
equipped with covering discs on the outermost tines. Side discs are therefore
considered extras on markets other than the German (see "Extras, Side discs").
There is no transport lock on the folding models as the side sections move
right in over the main frame where they will rest on the supporting structure
(A).
Unfolding is done by activating the hydraulic handle in the unfolding position.
It is important that the side sections are completely unfolded and press against
the adjustment bolts (fig. 5) as the main frame and the side sections should be a
rigid unit.
Fig. 7
Before folding the 380-model any side discs must be folded to avoid collision.
To obtain optimal tillage a working speed of 6-7 mph (10-12 kph) is
recommended. However, one should always drive according to conditions.
Please note that wear is heavily increased when speed is increased. Shares may
be lost or damaged when driving to fast under unfavourable conditions.
When driving at high speed - especially under dry conditions - wear on the
tines will increase considerably.
Dinco is a power-demanding implement and it is recommended to have a
tractor with a sufficient power surplus so that working speed can be maintained
when driving uphill. In this way the field gets a uniform treatment which may
be important later on.
Dinco
A
Advertisement
Table of Contents
