Retract; Operating Speed; Power - DAL-BO MaxiCut 200 Instruction Manual

Retract

Lower wheel frame and raise roller clear of ground.
Retract side sections, fit transport chain.

Operating speed

An operating speed of 18-25 km/h is recommended, but always operate ac-
cording to conditions.
Increased speed will increase wear, particularly in dry conditions. There will
also be a risk of the roller throwing up soil and stones.

Power

Power requirement will depend on soil type, terrain and speed.
Table 2, Guide to power requirement in HP
Model (cm)
HP min.
MaxiCut
200
70
300 600
90 150
Side 17