Table of Contents
Advertisement
Mounting of NSH
Ñ
Crumbler
Page 18
Accessories
Various forms of accessories for Dinco exist, e.g. hydraulic stone breakaway
(NSH), crumblers and side discs. Other accessories are lights and seeddrills.
Mounting the NSH stone release system on a Dinco with mechanical stone
release (shearbolts) is easily done as Dinco has been prepared for this
conversion.
Fig. 11
Mechanical stone breakaway
1. Support Dinco as described in "Replacement and Repairs" to avoid danger
of personal injury. Tines should be free of the ground in order to be able to
move them freely.
2. Remove the splitpins (A) and pull out the pins. Now the mechanical
shearbolt cylinders can be removed.
3. Then mount the hydraulic stone breakaway instead with the same pins.
Please remember to remount the splitpins.
4. Mount the hydraulic hoses etc. according to the spare parts drawing.
Connect the hoses so that they do not lie flat against the frame. This will
extend their life span. Mount the accumulator so that the tines can break
back completely without colliding with the accumulator.
Please check that hoses are not in danger of being disconnected or squeezed.
The crumbler is mounted behind the rear roller and gives an extra working of
the field. The crumbler is designed as a roller with a smaller diameter than the
rear roller, which means a faster rotation and thereby a more effective crushing
of clods. At the same time the crumbler packs the topsoil to preserve the
moistness of the soil.
Dinco
NSH stone breakaway
A
Advertisement
Table of Contents
