Table of Contents
Advertisement
General information on damage to property and damage to the product
3 General information on damage to prop-
erty and damage to the product
The warranty only applies to the supplied manifolds/modules.
• The claim to warranty expires if the product is incorrectly assembled, commis-
sioned and operated, not used as intended and/or handled improperly.
Inadmissible mechanical load!
Impact or shock forces on attached valves and components may damage or even
destroy them.
▶
Do not place/put the manifold/module onto the attachment parts.
▶
Never use attachment parts as handle or step. Do not place/put any objects on
top of them.
Dirt and foreign particles!
Risk of damage, wear and malfunctions due to ingress of dirt and foreign particles.
Contamination and metal particles may damage valves and cause leakage.
▶
During installation, ensure utmost cleanliness in order to prevent foreign par-
ticles such as welding beads or metal chips from getting into the hydraulic lines.
▶
Check before commissioning whether all hydraulic connections are tight and
that all the seals and caps of the plug-in connections are correctly installed
and undamaged.
▶
Ensure that no cleaning agents are able to penetrate the hydraulic system.
▶
Do not use linting fabric for cleaning.
Hydraulic fluid harmful to the environment!
Leaking hydraulic fluid leads to environmental pollution.
▶
Immediately remedy possible leakage.
▶
Dispose of the hydraulic fluid in accordance with the currently applicable na-
tional regulations in your country.
ONLY FOR ELECTRIC COMPONENTS!
Uncontrolled disconnection and connection of plug-in connectors!
Device might be destroyed!
▶
Before installation works, separate the device from the mains or from the volt-
age source or de-energize it.
▶
Do not plug in or pull the electric plug-in connector as long as the voltage supply
is activated.
Contact with salt water leads to increased corrosion at the manifold/module and
may damage the product. So take suitable corrosion protection measures.
NOTICE
RE 07601-B/12.2013, manifolds and modules, Bosch Rexroth AG
13/36
Advertisement
Table of Contents
