Safran CORTEX RTR NeXt Series User Manual page 89


<udpSourcePort> tag
This field is used to set the UDP/IP source port.
Tag name
udpSourcePort

<udpDestPort> tag
This field is used to set the UDP/IP destination port.
Tag name
udpDestPort

<udpSourceInterface> tag
This field is used to set the UDP/IP source interface (if value is 0.0.0.0, interface will be automatically
chosen by the operating system).
Tag name
udpSourceInterface String

<udpTimeToLive> tag
This field is used to set the Time To Live value of each UDP frame.
Tag name
udpTimeToLive

<tPacketSent> tag
This field is used to enable or disable the sending of Time Packets.
Tag name
tPacketSent

<tPacketChannelId> tag
This field is used to fill the Channel ID field of the UDP Time Packet Header.
Tag name
tPacketChannelId

<tPacketDateFormat> tag
This field is used to fill the bit 9 of the Time Packet Channel-Specific Data of the UDP Time Packet
Body.
Tag name
tPacketDateFormat

<tPacketTimeFormat> tag
This field is used to fill the bits 4 to 7 of the Time Packet Channel-Specific Data of the UDP Time
Packet Body
Tag name
tPacketTimeFormat String
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
Type Possible values
Integer 0 to 65535
Type Possible values
Integer 0 to 65535
Type Possible values
xxx.xxx.xxx.xxx
(xxx : 0 to 255)
Type Possible values
Integer 1 to 5
Type Possible values
String Disabled,
Enabled
Type Possible values
Integer 1 to 65535
Type Possible values
String IRIG, MandY
Type Possible values
IRIG-B
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Default value
10001
Default value
0
Default value
0.0.0.0
Default value
2
Default value
Disabled
Default value
1
Default value
IRIG
Default value
IRIG-B
Safran Data Systems
.
Page 89