Safran CORTEX RTR NeXt Series User Manual page 70

In the picture here after, the FM discriminator gain of the demodulator n°3 has been set to "X8". The
signal level at the bit sync input has been increased.
The FM discriminator gain is also taken into account on the video output. Thus in the previous
example:

With the FM discriminator gain set to nominal, the Video output level was 1Vpp maximum.

With the FM discriminator gain set to "X8", the Video output level can be tuned to 4 Vpp.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Eye Diagram at the
input of the bit-sync 3.
FM discriminator gain
has been set to "X8"
Safran Data Systems
.
Page 70