Safran CORTEX RTR NeXt Series User Manual page 52

7. Once upgrade is done, the RTR
needs to be shutdown with Power
Off. At the next start, a standard
start-up will occur, as describe in
the following chapter.
8. After Upgrade has been done, the
ADP boards version displayed in the
version page should be as following:
SW PCI Version ff.3.1.0 (or higher
version)
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Safran Data Systems
.
Page 52