Reinstalling A System With Existing Windows 7 Embedded Partition - Safran CORTEX RTR NeXt Series User Manual

5. A new partition is now created and you can
continue the installation by clicking on "Next"
5.1.4

Reinstalling a system with existing Windows 7 Embedded partition.

3. We recommend to delete each partition
before installing :
- Select Disk 0 Partition 1
- Click on Drive options (Advanced)
- Click on Delete
4. Windows asks a confirmation to delete the
existing system partition.
Confirm by pressing "OK" Button.
5.
6. Repeat the same operation with the other
partition : Disk 0 Partition 1
7. Refer to 5.1.3 to proceed with installation
on a blank hard drive.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
« Windows 7 Embedded Installation » – New partitions.
« Windows 7 Embedded Installation » – Partition selection.
« Windows 7 Embedded Installation » – Erase data.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Safran Data Systems
.
Page 42