Cortex Rtr Software Uninstallation; Back Up Of The Configurations Files - Safran CORTEX RTR NeXt Series User Manual

5.6

Cortex RTR Software Uninstallation.

5.6.1

Back up of the configurations files

Uninstalling the Cortex RTR software erases all the configuration files:
- To save the mcs files, save the directory
- To save the CTX files, save the following files :
- To save the ch10 html file :
After reinstallation of the RTR software, it is possible to copy these configuration files in the
dedicated folders.
5.6.2 Cortex RTR Software Uninstallation
Prerequisite: You must be logged as "cortexadmin". Close all Radio Telemetry Receiver application before
running installation or uninstallation.
Go to the "Window Start Button", select "All
1.
Programs > RTR Signal Processing > Uninstall RTR
Signal Processing".
2. The following window should appear
Click on "Yes" to run uninstall
3.
4. The following window should appear
Click on "Yes" to start uninstall
5.
Click on "Yes"
6.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual

D:\ZDS\Data\cortex\cortex-nt

D:\ZDS\Data\cortex\TmpCrtx

D:\ZDS\Data\rtrnt\CTXDocument1\NameTable

First log yourself as administrator

Then save the following file : C:\Program Files\ZDS\rtrnt\config\xml\ch10_cfg
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev
Previous Ref.:
Date:
: D:\ZDS\Data\CrtxMCS
Safran Data Systems
This document is the property of
07
DTU000567
21/06/2021
.
Page 50