Safran CORTEX RTR NeXt Series User Manual page 88


<timeSource> tag
This field is used to fill the bit 6 of the Packet Flags of the UDP Packet Header.
Tag name
timeSource

<timeFormat> tag
This field is used to fill the bits 2 to 3 of the Packet Flags of the UDP Packet Header.
Tag name
timeFormat

<checksumSize> tag
This field is used to fill the bits 0 to 1 of the Packet Flags of the UDP Packet Header.
Tag name
checksumSize

<alignmentMode> tag
This field is used to fill the bit 21 of the PCM Packet Channel-Specific Data of the UDP Packet Body.
Tag name
alignmentMode

<dataMode> tag
This field is used to fill the bits 18 to 20 of the PCM Packet Channel-Specific Data of the UDP Packet
Body.
Tag name
dataMode

<udpMode> tag
This field is used to set the UDP/IP mode.
Tag name
udpMode

<udpAddress> tag
This field is used to set the UDP/IP destination address.
Tag name
udpAddress
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
Type Possible values
String Primary,
Secondary
Type Possible values
String Chapter4,
IEEE1588,
ERTC
Type Possible values
String None,
8bits,
16bits,
32bits
Type Possible values
String 16bits,
32bits
Type Possible values
String Throughput
Type Possible values
String Unicast,
Multicast
Type Possible values
String xxx.xxx.xxx.xxx
(xxx : 0 to 255)
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Default value
Primary
Default value
Chapter4
Default value
32bits
Default value
32bits
Default value
Throughput
Default value
Multicast
Default value
239.255.11.10
Safran Data Systems
.
Page 88