Safran CORTEX RTR NeXt Series User Manual page 67

6.6.4.2 Combiner setup
On both receivers, the Post D combiner inputs are configured as follow:

Input 1  Master pre D

Input 2  Slave pre D
On the example, here above, the input of the Bit-sync n°2 is connected to the Ext Post D output.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Safran Data Systems
.
Page 67