Skoda Octavia III 2013 Service Manual page 110

Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
– Provide a catch pan for used brake fluid.
Note
Slacken the vent valve using the set of tools for brake bleeding
♦
- VAS 6564- and tighten. While doing so, pull the bleeder hose
through the socket insert with a corresponding hollow adapter
piece from this set.
Fit a torque wrench on the socket insert with a corresponding
♦
hollow adapter piece for tightening the vent valve.
In view of the different versions and the fitting locations of the
♦
slave cylinder with the vent valve, tightening the vent valve
using the set of tools for brake bleeding - VAS 6564- (with the
torque wrench inserted) cannot always be performed due to
lack of space.
In this case, replace the battery and battery holder where re‐
♦
quired. Pay attention to the work sequence when disconnect‐
ing and reconnecting the battery ⇒ Electrical System; Rep.
gr. 27 .
– If necessary remove cap from vent valve of slave cylinder.
Gearbox 0A4
– Fit the bleeder hose of the catch pan onto the vent valve of the
slave cylinder -arrow-.
Gearbox 0AJ
– Fit the bleeder hose of the catch pan -arrow- onto the vent
valve of the slave cylinder.
Gearbox 02Q
106
5. Chassis