Skoda Octavia III 2013 Service Manual page 78

Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
Note
Do not pay attention to the remaining positions!
– Insert the filter element -2- in the filter housing -1- so that the
gasket of the filter element -2- engages fully into the recess of
the filter housing -1-.
– Position the filter cover -1- with the fuel hoses connected on
the filter housing so that the support in the filter cover engages
in the gasket for the hole in the filter element.
– Screw in the screws -4- for the filter cover and tighten to speci‐
fied torque.
Tightening torque
Screws for cover
74
Nm
5