Derived Alarms - DPS Telecom TempDefender G2 User Manual

38
11.8

Derived Alarms

ID
Description
Rev.
Notification Devices
Derived Description
On Set
On Clear
Qual. Time (Qualification
Time)
Qual. Type (Qualification
Type)
Basic Controls Configuration
ID number for the derived alarm.
User-definable description for the derived alarm.
Reverse the polarity of the alarm in the software by checking this box.
Check which notification device(s), 1 through 8, you want to send alarm notifications
for the derived alarm.
Details>>
Enter a derived equation for the derived alarm. See the section, Derived Alarm and
Control Operations, for accepted operations and formula examples.
User-definable description (condition) that will appear for the derived alarm on Set.
Example: "Alarm".
User-definable description (condition) that will appear for the derived alarm on Clear:
"Example: "Alarm Cleared".
The length of time that must pass, without interruption, in order for the condition to be
considered an Alarm or a Clear.
Allows you to choose whether you want to apply the Qualification Time to the alarm
Set, Clear, or Both.