Table of Contents
Advertisement
Revision History
November 19, 2020
December 11, 2019
November 20, 2019
December 21, 2018
M ay 3, 2018
January 4, 2018
December 7, 2017
November 8, 2017
M arch 23, 2017
October 24, 2016
July 19, 2016
April 27, 2015
M arch 10, 2015
...
August 14, 2013
This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this
document may be photocopied without prior written consent of DPS Telecom.
All software and manuals are copyrighted by DPS Telecom. Said software and manuals may not be reproduced, copied,
transmitted or used to make a derivative work, by either mechanical, electronic or any other means in whole or in part, without
prior written consent from DPS Telecom, except as required by United States copyright laws.
© 2020 DPS Telecom
Notice
The material in this manual is for information purposes and is subject to change without notice. DPS Telecom shall not be
liable for errors contained herein or consequential damages in connection with the furnishing, performance, or use of this
manual.
Added sections for M odbus support
Added support for 10/100Base T Ethernet Switch
Added Welcome and Standing Alarms sections
Enabled DNP3 on TempDefender G2 platform
Added High-Security Firmware options
Updates to HVAC M onitor Sections
Added Derived Alarms, Derived Controls, and 3 Alarm M odule
Added Setting up a Temperature/Air Flow Sensor as an HVAC M onitor
Added History Log Format and Operation Section
Added HVAC M onitor M ode
Push-to-talk function added
Timers Update
M inor Browser Updates
...
Initial Release
Advertisement
Table of Contents
Need help?
Do you have a question about the TempDefender G2 and is the answer not in the manual?
Questions and answers