Quick Start - Kinetec Maestra User Manual

12.6.

Quick Start

Set up the patient and proceed as below:
Beginning
Switch the unit ON
To choose the movement
To start the session with the original
parameters for the movement (default
setting).
Note: the values in the display column are given as an example. In actual use, they will come from stored
programs or previous sessions.
Warning: Always check the motion parameters displayed on the hand control before starting the
device.
Kinetec Maestra™
Keys to
Display
press
KINETEC
MAESTRA V01.4
Please Wait
PRONO/SUPINATION
-10 STOP
PRONO/SUPINATION
-10 STOP
WRIST
-20 STOP
WRIST+MP
0 STOP
ULNAR DEVIAT.
0 STOP
THUMB OPPOSITION
0 STOP
LG FING. EXT/FLX
0 STOP
INTRINSIC +
0 STOP
INTRINSIC -
0 STOP
DISTAL
0 STOP
DISTAL
0 RUN
EN
Check that the hand control is not
locked (See page 6).
5 10
5 10
EXT/FLX
96 20
EXT/FLX
96 60
The display shows the movement
selected, with the default settings.
96 40
Successive presses on the keys
96 90
or
96 50
allows you to select different
movements.
96 40
96 90
EXT/FLX
96 40
EXT/FLX
The angle display changes with the
20 40 current movement.
Remarks
7 / 23