Quick Start; Possible Values For Each Parameter - Kinetec Spectra User Manual

Use of the hand control Use of the hand control

Quick Start

Quick Start
Set up the patient and proceed as below:
Beginning
Switch the unit ON
Start the session with the original parameters of the
movement (default setting).

Possible values for each parameter:

Possible values for each parameter:
GB
8 8
Keys to press
• Treatement Mode
• Extension limit
• Flexion limit
• Speed 1 to 5 (from 30° to 160° per minute)
• Force
• Extension pause 0 to 900 seconds (15minutes)
• Flexion pause 0 to 900 seconds (15minutes)
• Timer No timer(00H00) to 24H00
Display
KINETEC
Spectra V01.0
Please wait
Kinetec
30 STOP 15 90
Or
WARMUP
30 STOP 15 90
KINETEC
30 run 45 90
Possible values Default setting
Normal
-10 to 115° 30°
-5° to 120° 90°
2
1 to 6 6
0
0
0
Remarks
Check if the hand control is not blocked
(See page 7).
If the Warm Up mode is selected, switch OFF
this mode by pressing on the key
The value change at the speed of the
movement.