Electrical Connection; Procedure To Start The Machine; Changing The Display Language; Start/Stop/Reverse Function - Kinetec Spectra Essential User Manual

Electrical connection: safety first.
2 versions of electrical protection are available for the device KINETEC
Essential machine. The identification label shows which version a machine is
equipped with:
Type BF, Class II devices,
for home use, bear the following symbols:
Type B, Class I devices,
for use in a professional environment, bear the following symbols:
See page 10 for the meaning of the symbols.
Before connecting the device to the power supply, check that the
mains voltage matches that shown on the identification plate (100-240V~ 50/60Hz).
Connect the hand control (4).
Connect the power supply cable (18).
IMPORTANT
For Type B Class I devices, and to avoid all risks of electric shock, the machine should only be connected to
a power supply that has protective earthing.
To connect the power supply, only use the original cable supplied with the machine.
Check that the cables remain free around the device so that they do not get damaged.
Check that the machine is not damaged, in particular the protective housings.

Procedure to start the machine

Press the ON / OFF switch (9).
The display comes on, the machine carries out a self-test, and then the display shows:
Your device KINETEC

Changing the display language

Beginning
Switch the unit ON
Press simultaneously on the 2 keys
To change the language
To confirm the new language
START / STOP / REVERSE function
As with all KINETEC systems, KINETEC

START/STOP/REVERSE function.

Press the
Press the key of the hand control. The movement starts in the opposite direction.
For optimum safety, always give the hand control to the patient before starting the system.

Procedure to stop the machine:

To stop the machine's movement: press the
To switch the unit off: press the ON / OFF switch (9) (see page 5)
Spectra Essential
Spectra Essential is ready to be used.
®
Keys to
press
and
Or
Spectra Essential machines are equipped with a
®
key of the hand control. The movement stops,
Display
KINETEC
40 STOP 50 110
LANGUAGE
ENGLISH
LANGUAGE
FRENCH
OK
SWITCH ON/OFF
CAUTION
key
EN
9
Spectra
®
18
4
EXT
30
Remarks
Check if the hand control is not
locked (See page 6).
The display indicates the language
selected.
The French language is selected.
Available languages: English, French,
German, Italian and Spanish.
Switch the machine off
and then on again
to apply the changed
display language.
FLEX
STOP 15 70
5/12