Configuration (Standalone); Static Color; Automatic Programs; Program Speed - Chauvet DJ LED SHADOW 2 ILS User Manual

Operation

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.

Automatic Programs

To run the LED Shadow 2 ILS with an automatic program, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a program, from P 1–6.
4. Press <ENTER>.

Program Speed

To set the program speed of the LED Shadow 2 ILS, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the speed, from S. 1–100.
4. Press <ENTER>. The display will return to the selected program.

Sound-Active Mode

To run the LED Shadow 2 ILS in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).

Sound Sensitivity

To set the sound sensitivity on the LED Shadow 2 ILS, do the following:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from u 0–100.
3. Press <ENTER>. The product will return to sound-active mode.

Manual Mode

To run the LED Shadow 2 ILS with a custom color and strobe speed, do the following:
1. Press <MENU> repeatedly until u-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
• s. _ _ _ (strobe)
3. Use <UP> or <DOWN> to increase or decrease the value, from 0–255 (for dimmer) or from 0–100
(for the strobe speed: 0 is off, 1–99 is slow to fast, 100 is sound-active).
4. Press <ENTER>. to cycle through the options.
5. Repeat steps 3-4 until the product is set as desired.
LED Shadow 2 ILS User Manual Rev. 1 Page 9 of 15