Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The LED Shadow 2 ILS may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
•
Make sure adequate ventilation is provided around the product.
•
Make sure that the structure or surface onto which the product is being mounted can support the
product's weight. (see the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Diagram
Mounting clamp
(such as CLP-15 from Chauvet)
LED Shadow 2 ILS User Manual Rev. 1
Technical
Specifications)
Safety
Notes.
Safety cable
(such as CH-05
from Chauvet)
Mounting bracket
Bracket adjustment knob
(x2)
Page 5 of 15