Microtek C580 User Manual page 7

Message of Auto Tuning
Notice
1. This function has to be executed when full screen picture is displayed. When the screen is painted
with black or character strings on the black background, this function may not perform correct
tuning. When the displayed picture is not suitable for tuning, the failure message as shown below
is displayed and tuning is aborted.
2. This function is a supplemental tool. If the performance of the screen is not good enough after
executing the function, please re-execute the function or enter the OSD menu to make adjustment
by manual to make the screen become clear.
Once you activate Auto Tuning, the following view
indicating that the unit is executing Auto Tuning will be
prompted.
Successfully executing Auto Tuning, select ACCEPT by
pressing key to confirm the adjustment Select UNDO
to cancel the adjustment.
If you do not make any selection within 5
seconds,then the unit will automatically confirm
the adjustment.
5