Trouble-Shooting - Microtek C580 User Manual

Trouble-Shooting

If you are experiencing difficulties with your monitor, check the following table for possible
solutions.
Problem
? No picture
? Image is scrolling or unstable
? LED on the monitor is not lit
? Picture is fuzzy
? Picture bounces or wave pattern
is present in the picture
? Display image is not centered,
too small, or too large
10
Items to check
1. The VGA card should be completely seated in the slot.
2. Power switch of the monitor and the PC should be in the ON
position.
3. The signal cable should be completely connected to the
video card / computer.
4. Check if the pins of the connector are bent or shrunk.
1. The signal cable should be completely connected to the
computer.
2. Check the pin assignments and signal timings of the monitor
and your video card.
1. The adapter should be connected to DC Jack and AC outlet.
1. Adjust the Dot Delay control or use Auto Tuning function.
1. Move electrical devices that may be causing electrical
interference away from the monitor.
2. Refer to the FCC information of this manual.
1. Adjust Size and Position Controls in the OSD or use Auto
tuning function.