Microtek 722S User Manual page 23

5. Loosen the six stand-fixing screws, then remove the stand
from the monitor.
6. Install the arm to the monitor with four arm-fixing screws.
NOTE:
• The stand preattached to the monitor is specially designed for
use with this monitor. Once the stand is removed from the
monitor, do not try to attach the stand to other devices.
• Store the stand together with its fixing screws for future use.
Using different types of screws may cause malfunction.
• The screws used to tighten the arm should be M4 screws
with a length of 6 mm ~ 8 mm protruding from the surface to
be attached. Using different types of screws may cause the
monitor to fall off or be internally damaged.
18