Panasonic FP7 Series User Manual page 73
Programmable controller thermocouple multi-analog input unit / rtd input unit
Hide thumbs
Also See for FP7 Series:
- Command reference manual (1222 pages) ,
- User manual (275 pages) ,
- Additional functions manual (45 pages)
Table of Contents
Advertisement
I/O number
CH0 CH1 CH2 CH3 CH4 CH5 CH6 CH7
to
to
to
YE
Y1E
Y2E
YF
Y1F
Y2F
(Note 1)
The I/O numbers in the table indicate offset addresses. The I/O numbers actually allocated are the
numbers based on the starting word number allocated to the unit.
Example) When the starting word number for the unit is "10", the error flag is X11F, the disconnection
detection execution relay of CH0 is Y100, and the error flag reset relay is Y10F.
(Note 2)
For the Thermocouple Multi-analog Input Unit, the disconnection detection function is valid in the case
of the following range; "Thermocouple, voltage: 1-5 V and current: 4-20 mA".
(Note 3)
On the RTD input unit (AFP7RTD8), the disconnection detection execution relay and the
disconnection detection flag cannot be used. Disconnection is detected by a digital value (K30000)
different from normally converted values within the range.
WUME-FP7TCRTD-04
to
to
to
to
Y3E
Y4E
Y5E
Y6E
Y3F
Y4F
Y5F
Y6F
Name
to
Y7E
Error flag reset
Y7F
relay
8.2 I/O Number Allocation
Description
Resets an error flag.
8-9
Advertisement
Table of Contents
