I/O Number Allocation - Panasonic FP7 Series User Manual

8.2 I/O Number Allocation

■
Input contact
I/O area
Name
number
CH0 Analog conversion
WX0
data
WX1 CH0 Optional function flag
CH1 Analog conversion
WX2
data
WX3 CH1 Optional function flag
CH2 Analog conversion
WX4
data
WX5 CH2 Optional function flag
CH3 Analog conversion
WX6
data
WX7 CH3 Optional function flag
CH4 Analog conversion
WX8
data
WX9 CH4 Optional function flag
CH5 Analog conversion
WX10
data
WX11 CH5 Optional function flag
CH6 Analog conversion
WX12
data
WX13 CH6 Optional function flag
CH7 Analog conversion
WX14
data
WX15 CH7 Optional function flag
(Note 1) The I/O numbers in the table indicate offset addresses. The I/O numbers actually allocated are the
numbers based on the starting word number allocated to the unit.
Example) When the starting word number for the unit is "10", the A/D conversion data of CH0 is WX10
and the error flag is X11F.
■
Input contact (Optional functions/Error flag area)
I/O number
CH0 CH1 CH2 CH3 CH4 CH5 CH6 CH7
X10 X30 X50
X11 X31 X51
X12 X32 X52
WUME-FP7TCRTD-04
X13
X70 X90 X110
0
X13
X71 X91 X111
1
X13
X72 X92 X112
2
Default Description
K0
H0
K0
H0
K0
H0
Analog conversion data area
K0
Digital conversion values corresponding to analog
input are stored as 16-bit signed integer data. Stored
H0
values vary by ranges. When optional average
processing, scale conversion, offset/gain processing
has been set, data after the processing is stored.
K0
Optional function flag area
H0
Refer to the following.
K0
H0
K0
H0
K0
H0
Name
Disconnection
X15
detection
0
(Note 2)(Note 3)
flag
X15 Upper limit
1 comparison relay
X15 Lower limit
2 comparison relay

8.2 I/O Number Allocation

Description
ON with disconnection detected and
OFF with disconnection restored.
Turns ON when the value exceeds
the set upper limit.
Turns OFF when the value drops
below the set lower limit.
8-7