Panasonic FP7 Series User Manual page 56

6.5 Holding max./min. values
Unit
memory Name
No. (Hex)
UM 00177
UM 00178
UM 00179
UM 0017A
UM 0017B
Holding min. value
UM 0017C
UM 0017D
UM 0017E
UM 0017F
(Note 1) The unit memory numbers in the above table are listed for CH0 to CH7 in numerical order.
■
I/O allocation
The I/O numbers in the timing chart and program are shown on the condition that the starting
word number of the unit is 10. Actual I/O numbers allocated to the analog input unit are
determined by the starting word number.
*1 Hold execution relay Y105
*2 Hold execution flag
■
Configuration
Name
Function Holding max./min.
setting values
Holding min. value
Holding max. value
■
Sample program
The analog data on ch0 of the unit is read, and the data holding the maximum and minimum
values will be read at the desired data register.
6-12
Default Data range and description
The acquired maximum value will be held when the maximum
and minimum value hold function is used.
K0
Setting range: -31250 to +31250 (specified with a signed
integer)
CH0 CH1 CH2
Y115 Y125
X115 X135 X155
Default Setting range and description
Not
Select "Execute".
execute
K0 Holding min. value (-31250 to +31250)
K0 Holding max. valeu (-31250 to +31250)
CH3 CH4 CH5
Y135 Y145 Y155
X175 X195 X215
CH6 CH7
Y165 Y175
X235 X255
WUME-FP7TCRTD-04