Pressure welding tool for pole terminals
Manufacturer
Phoenix Contact
3.1.2 Wiring
■
Wiring method
1.
Insert a screwdriver between the terminal block and the case, and remove the terminal
block.
2.
Remove a portion of the wire's insulation.
3.
Insert the wire into the terminal block until it contacts the back of the block socket, and then
tighten the screw clockwise to fix the wire in place.
4.
Fit the terminal block into the unit securely.
WUME-FP7TCRTD-04
Phoenix Contact model No.
Part number
CRIMPFOX 6
3.1 Wiring of Terminal Block
Product No.
1212034
3-3