Front I/O Assembly - Lenovo ThinkSystem SR650 V2 Maintenance Manual

Front I/O assembly

Use the section to understand the cable routing for the front I/O assembly.
Notes:
• The front I/O assembly varies by model. The illustration shows the cabling scenario for the front I/O
assembly on the right rack latch. The cable connection for the front I/O assembly on the front media bay is
the same.
• When routing the front I/O assembly cable, ensure that it is fixed on the upper frame of the cable retainer.
For details, refer to "Install the rack latches" on page 309.
Figure 16. VGA connector and front I/O assembly cable routing
From
VGA cable on the left rack latch
1
External diagnostics cable on the left rack latch
2
Front panel and front USB cable on the right rack latch
3
ThinkSystem SR650 V2Maintenance Manual
72
To
VGA connector on the system board
External LCD connector on the system board
Front I/O and front USB connectors on the system board