Remove The M.2 Adapter And M.2 Drive - Lenovo ThinkSystem SR650 V2 Maintenance Manual

Remove the M.2 adapter and M.2 drive

Use this information to remove the M.2 adapter and M.2 drive.
About this task
Attention:
• Read "Installation Guidelines" on page 185 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku:
https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1. Remove the top cover. See "Remove the top cover" on page 376.
Step 2. Disconnect the M.2 cables from the system board.
Step 3. Remove the M.2 drive from the M.2 adapter.
Figure 190. M.2 drive removal
1. Press both sides of the retainer
2. Slide the retainer backward to loosen the M.2 drive from the M.2 adapter.
3. Rotate the M.2 drive away from the M.2 adapter.
4. Pull the M.2 drive away from the connector
.
2
at an angle of approximately 30 degrees.
1
Chapter 4
.
Hardware replacement procedures
245