Lenovo ThinkSystem SR650 V2 Maintenance Manual page 68

–
http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html
– "Handling static-sensitive devices" on page 188
• If there is a clear protective sticker on the top of the switch blocks, you must remove and discard it to
access the switches.
• Any system-board switch or jumper block that is not shown in the illustrations in this document is
reserved.
Figure 13. SW8 switch block on system board
Table 21. SW8 switch block
Switch number
SW8-1
SW8-2
SW8-3
ThinkSystem SR650 V2Maintenance Manual
58
Switch name
ME firmware security
override switch
Clear CMOS switch
Force XCC reset switch
Description
• OFF: The switch is in default setting.
• ON: Enable Flash security override.
• OFF: The switch is in default setting.
• ON: Clear the real-time clock (RTC) registry.
• OFF: The switch is in default setting.
• ON: Force the Lenovo XClarity Controller to update to the
latest version.