Install The Front I/O Assembly - Lenovo ThinkSystem SR650 V2 Maintenance Manual

Install the front I/O assembly

Use this information to install the front I/O assembly.
About this task
Attention:
• Read "Installation Guidelines" on page 185 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku:
https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1. Touch the static-protective package that contains the front I/O assembly to any unpainted surface
on the outside of the server. Then, take the front I/O assembly out of the package and place it on a
static-protective surface.
Step 2. Install the front I/O assembly.
Figure 160. Front I/O assembly installation
a. Insert the front I/O assembly into the front chassis.
b. Install the screws to secure the front I/O assembly in place.
.
Chapter 4 Hardware replacement procedures
213