Lenovo ThinkSystem SR650 V2 Maintenance Manual page 324

Hide thumbs Also See for ThinkSystem SR650 V2:
Table of Contents

Advertisement

About this task
Attention:
• Read "Installation Guidelines" on page 185 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DqVplE36HIvdM_sq_Auw3U
• Youku:
https://list.youku.com/albumlist/show/id_59643657.html
Procedure
Step 1.
Remove the top cover. See "Remove the top cover" on page 376.
Step 2.
Disconnect the cable of the super capacitor module.
Step 3.
Remove the super capacitor module.
Figure 242. Super capacitor module removal
a.
Open the retention clip on the super capacitor holder.
b.
Take the super capacitor module out of the holder.
ThinkSystem SR650 V2Maintenance Manual
314

Advertisement

Table of Contents
loading

Table of Contents