Front IO assembly
The front IO assembly provides controls, connectors, and LEDs. The front I/O assembly varies by model.
Figure 5. Front IO assembly (on rack latch)
Note: The LCD diagnostic panel
information such as active errors, system status, firmware information, network information, and health
information. For details, see "LCD diagnostics panel" on page 29.
Table 13. Components on the front I/O assembly
Callout
USB 3 (5 Gbps) connector
1
Power button with power status LED
3
System ID button with system ID LED
5
1
USB 3 (5 Gbps) connector
The USB 3.2 Gen 1 (5 Gbps) connector can be used to attach a USB-compatible device, such as a USB
keyboard, USB mouse, or USB storage device.
Figure 6. Front IO assembly (on media bay)
on media bay provides an LCD display to quickly access system
7
Callout
2
management
4
6
USB 2.0 connector with XClarity Controller
Network activity LED (for OCP 3.0 Ethernet adapter)
System error LED
Chapter 2
.
Server components
27