Channel Name Entry - Icom IC-78 Instruction Manual

n

Channel name entry

You can enter a channel name of up to 8 characters
for each Memory channel. This provides easy recogni-
tion of channel use or the station name.
q Select the desired channel by pushing [UP p]
or [q DN], rotating the Channel Selector, or using
the Keypad. (p. 12)
w Push [FC] to select a Memory name display, if de-
sired.
e Hold down [ENT] for 1 second to enter the Memory
channel name entry mode.
• The first digit blinks
r Push corresponding keys to enter the desired char-
acters. (See the following chart.)
• Push [UP p] or [q DN], or rotate the Channel Selec-
tor to move the cursor to select the next character, or to
change the digit.
t Hold down [ENT] for 1 second to save the chan-
nel name.
D
Corresponding characters
KEY Assignable characters
(1), (space),
( ( ), ( ) ),
(–), (/),
(>), (@)
(4), (G),
(7), (P),
KEY Assignable characters
('),
(∗), (+), (2),
(<), (=),
(5),
(H), (I) (8),
(R), (S) (space w/change digit)
• Channel comment programming example
Hold down for 1 second
KEY
(A), (B), (C)
(J), (K), (L)
(T), (U), (V)
3
OPERATION
×4 (I)
×4 (C)
×4 (O)
Push or rotate the Channel
Selector, then:
×2 (M)
×2 (2 spaces)
×1 (2)
Hold down for 1 second
Assignable characters
(3), (D), (E), (F)
(6), (M), (N), (O)
(9), (W), (X), (Y)
(0), (Q), (Z)
26