Table Of Contents - TESY AquaThermica Compact HPWH 3.2 100 Installation And Maintenance Manual

Contents
ENG
1. INTRODUCTION
1.1. Introduction
1.2. Disclaimer
1.3. Copyright
1.4. Operating principle
1.5. Available versions and configurations
2. TRANSPORT AND HANDLING
2.1. Conformity with European regulations
2.2. Degrees of protection provided by enclosures
2.3. Limitations of use
2.4. Operating limits
2.5. Fundamental safety rules
2.6. Information on coolant used
3. TRANSPORT AND HANDLING. (Fig.1; 2; 3; 4; 5)
3.1. Transport. (Fig.1 & 2)
3.2. Unpackintg
4. DESIGN CHARACTERISTICS (Fig.6; 7; 8; 9)
5. TECHNICAL DATA AND DIMENSSIONS (Fig.10; 10a)
6. INSTALLATION AND CONNECTION (Fig.11)
6.1. Requirements to the installation area.
6.2. Instalation. Fixing to the wall (Fig.12; 12a ; 16; 16а; 16d)
6.3. Ventilation connection. Air ducts. (Fig. 13; 14; 15; 17a; 17; 18; 19)
6.3.1. Non ducted ventilation. (Fig.13; 14).
6.3.2. Semi-Ducted ventilation
6.3.3. Ducted ventilation. (Fig.17a; 17).
6.4. Water supply connections (Fig.20;21)
6.5. Condense drain connections.
6.6. Electrical connections
7. COMMISSIONING.
7.1. Filling the tank with water.
8. OPERATING MODES. USER INTERFACE. INITIAL CONTROLLER ADJUSTMENT.
8.1. User interface - Buttons and their function explanation.
8.1.1. Power 'ON'
8.1.2. ON/OFF button
8.1.3. UP and DOWN buttons
8.1.4. Timer and clock settings
8.1.5. Setting button
8.2. User interface - LED icons description
8.3. Operating modes - main function
8.3.1. Operating range
8.3.2. Auto mode -
8.3.3. "Green mode" . (only heat pump will work at normal working situation)
8.3.4. "Boost mode"
8.3.5. "E heater only"
8.3.6. "Fan Mode"
8.3.7. " Defrost mode".
8.3.8. "Antifreeze mode"
8.3.9. Disinfection weekly cycle. (E-heater icon keeps blinking)
8.3.10. Other important remarks concerning appliance's working modes.
9. CONTROLLER ADJUSTMENT. PARAMETERS
9.1. Wiring diagram. (Fig.23) & Refrigerant circuit. (Fig.23a)
9.2. Parameter list
10. EXTERNAL CONNECTIVITY. (Fig.27)
10.1. Solar photovoltaic integration
11. MAINTENANCE AND CLEANING.
11.1. Resetting of safety thermostat 34 (Fig.9)
11.2. Quarterly inspections
11.3. Annual inspections
11.4. Magnesium anodes 29. (Fig.9)
11.5. Emptying the boiler. (Fig.20)
12. TROUBLESHOOTING
12.1. Malfunctioning of the unit and error codes
13. DISPOSAL.
14. GUARANTEE.
15. PRODUCT FICHE - Outdoor air heat pump (placed indoor side EN16147:2017)
+ .
.
.
. (Fig. 25)
.
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
10
10
11
13
13
13
14
14
14
14
15
16
16
16
16
16
16
16
16
16
17
17
18
19
19
19
20
20
20
20
20
21
21
21
21
21
22
23
23
23
23
24
24
24
24
24
25
25
26
28