Table of Contents
Advertisement
• Insert graphics
Insert normal graphics
(1) Select Insert Graphics to display a list of insertable graphics. The graphics that can be
inserted currently include a circle, arrow, rectangle, square, rhombus and parallelogram.
(2) After clicking Insert Graphics, insert the graphics of the default size, and the graphics will be
displayed in the middle of the canvas. If continuously clicking the graphics, the graphics will
be arranged from bottom to top, and sorted according to the insertion sequence.
(3) After inserting graphics, it supports copying, deleting, and rotating the selected graphics. At
the time of rotation, the rotation angle should be displayed. When it is 0, 90, 180, and 360
degrees, there is an automatic correction effect within the range of plus or minus 5 degrees.
Insert smart graphics
(1) Enable the single-person writing mode and enable smart graphics.
(2) Smart graphs can be recognized according to gestures. When it is recognized as a rectangle,
table insertion can be performed according to gestures. Elaborate on the cutting of tables.
(3) In smart graphics mode, both smart graphics and standard graphics can be inserted at the
same time. When smart graphics mode is turned off, only standard graphics can be inserted.
Using the Vision Board
35
Vision Board WR6BE User Manual
Advertisement
Table of Contents
