Power On/Off
• Connect the power cord of the device to a 100V to 240V AC outlet.
•
Press the power switch [ I O ] of the device to [ I ] (Some models have no power switch).
• Press the standby button [
to standby; to resume the device, simply press the standby button [
again.
• To turn off the device, press the power switch [ I O ] of the device to [ O ].
Note:
• When the AC power is turned off, wait at least 5 seconds before turning it on again in order to
prevent problems of the device.
Getting Started
5. Getting Started
] on the remote control in the power on state to switch the device
23
Power Switch
Power Supply Plug
] on the remote control
Vision Board WR6BE User Manual