Table of Contents
Advertisement
•
If it is necessary to remove safety devices, immediately install the safety devices
after the work.
•
Put on the correct personal protective equipment. Refer to section
3.6
Safety instructions during transport
Preliminary requirements
•
Make sure that the hoisting equipment or forklift truck can lift the EVSE safely.
Take into account the mass and the center of gravity of the EVSE.
•
Obey the safety instructions that apply to the hoisting equipment or the forklift
truck.
•
Put on the correct personal protective equipment. Refer to section
3.7
Safety instructions for earthing
Preliminary requirements
•
Make sure that the EVSE is connected to an earthed, metal, permanent electrical
system. Alternatively, install an equipment-earthing conductor with circuit
conductors. Connect this earthing conductor to an equipment-earthing terminal
or lead on battery charger.
•
Make sure that the connections to the EVSE comply with all applicable local
rules.
3.8
Lightning protection
•
Make sure the EVSE is within the protection angle of the lightning distraction
according to NEN-EN-IEC 62305. Install an earthing rod in the earth near the
foundation of the power cabinet.
6AGA000007-0603-EN | 001
•
•
Safety
3.3
.
3.3
.
31
Advertisement
Table of Contents
