Table of Contents
Advertisement
Technical data
20.12
Cable specifications
20.12.1
General specifications for cables
Parameter
Ambient resistance
Compliance
Isolation requirements
20.12.2
AC input cables
Parameter
Cable shielding (optional)
Diameter of the phase conductors
Diameter of the PE conductor
Maximum diameter of the cable
conductor
Strip length
20.12.3
Auxiliary AC input cables
Parameter
Cable shielding (optional)
Diameter of the phase conductors
Diameter of the PE conductor
Maximum diameter of the cable conduc-
tor
Strip length
20.12.4
DC power cables
Parameter
Type
Number of cores
Cross section range (minimum)
98
Specification
Resistance to placing in the ground, sub-
merged in conduit
Compliance with the VDE, CE, EAC Low Volt-
age Directive and the RoHS compliance.
Self-extinguishing and flame retardant isola-
tion according to DIN VDE 0482-332-1-2, DIN
EN 60332-1-2, IEC 60332-1-2
Specification
If the local rules require shielded cables, the
cable shielding must be connected to the PE
rail at both ends of the cable.
Refer to the local rules.
The same as the diameter of the phase con-
ductors
240 mm²
20 mm
Specification
If the local rules require shielded cables,
the cable shielding must be connected
to the PE rail at both ends of the cable.
Refer to the local rules.
The same as the diameter of the phase
conductors
240 mm²
20 mm
Specification
1x positive, 1x negative cable
Unshielded
1
95 mm²
6AGA000007-0611-EN | 001
Advertisement
Table of Contents
